Grid 10 - Usb Data Cable


Here's the pin layout and also a source for the 40 pin connector.
I bought a 40 pin connector (yes it does fit the grid 10) and attempted to create
a usb cable but this is for someone who knows how to solder and a bit of time
and patience. I put this project down years back becuase the wire contacts are small and i
was tired and forgot about it.

If someone does get this working please let me borrow the usb cable
so i can get through regisration on my grid 10.

 I can be contacted at zervon36@gmail.com
or skype: serv36

Source for 40pin Connector 40 Pin Connector

USB Data Cable Pin layout


    Pin 1: 5V (supply current into the core board)
    Pin 2: 5V (supply current into the core board)
    Pin 3: HEADS_RIGHT (headphone right)
    Pin 4: HEADS_LEFT (headphone left)
    Pin 5: HEADS_COM (headphone detection insertion)
    Pin 6: HEADS_MIC (headphone microphone)
    Pin 7: AUXR (aux right)
    Pin 8: AUXL (aux left)
    Pin 9: BUTTON1 (first button)
    Pin 10: 3.3V (3.3V output from the core board)
    Pin 11: 3.3V (3.3V output from the core board)
    Pin 12: SPKL+ (external speaker left +)
    Pin 13: SPKL- (external speaker left -)
    Pin 14: SPKR+ (external speaker right +)
    Pin 15: SPKR- (external speaker right -)
    Pin 16: OTG_DM (USB OTG -)
    Pin 17: OTG_DP (USB OTG +)
    Pin 18: BUTTON2 (second button)
    Pin 19: GND (ground)
    Pin 20: GND (ground)
    Pin 21: GPIO_A-3.3V (gpio shifted to 3.3V)
    Pin 22: GPIO_B-3.3V (gpio shifted to 3.3V)
    Pin 23: TX-5V (serial TX)
    Pin 24: RX-5V (serial RX)
    Pin 25: USB_4_N (USB -)
    Pin 26: USB_4_P (USB +)
    Pin 27: GPT_PWM-3.3V (gpio for screen PWM shifted to 3.3V)
    Pin 28: GPIO_TS2-5V (gpio for touchscreen shifted to 5V)
    Pin 29: I2C3_SDA-5V (first i2c sda shifted to 5V)
    Pin 30: I2C3_SCL-5V (first i2c scl shifted to 5V)
    Pin 31: I2C2_SDA-5V (second i2c sda shifted to 5V)
    Pin 32: I2C2_SCL-5V (second i2c scl shifted to 5V)
    Pin 33: DAT2+ (HDMI third lane +)
    Pin 34: DAT2- (HDMI third lane -)
    Pin 35: DAT1+ (HDMI second lane +)
    Pin 36: DAT1- (HDMI second lane -)
    Pin 37: DAT0+ (HDMI first lane +)
    Pin 38: DAT0- (HDMI first lane -)
    Pin 39: CLK+ (HDMI clock lane +)
    Pin 40: CLK- (HDMI clock lane -)